Factory-direct hydraulics for powered roof supports
Mining & Metals Central Asia 2026 — Atakent Exhibition Centre, Almaty, Kazakhstan · 16–18 September 2026 · booth Book a meeting

We will be at the show with our valve range for powered roof supports. Book a meeting and bring your part list or drawing — our engineers will review it at the booth.

Hydraulics for powered roof supports

Hydraulic valves and control systems for longwall powered roof supports

We manufacture safety valves, hydraulic locks, directional control valves, valve banks and support controllers for coal mines and mining equipment manufacturers — supplied factory-direct, with engineering support on drawings and working conditions.

Hydraulic valve bank for powered roof supports

Product range

Eight families cover the hydraulic circuit of a powered roof support — from the safety valve on the leg to the controller in the operator's hand. Tell us the support type and working pressure and we will match the series.

Safety valves for powered roof supports

Relief and yield valves that protect the support legs and props against overpressure at the working face.

Pilot-operated check valves

Hydraulic locks that hold the support under load and prevent creeping when the circuit is depressurised.

Directional control valves

Manual and pilot-operated control blocks for advancing, setting and lowering the support.

Shut-off valves

Isolation valves for taking a section or a leg out of circuit during maintenance and repair.

Filters for emulsion circuits

High-pressure filtration with replaceable elements and contamination indicators.

Lock valves

Load-holding valves that keep the support set when the supply is shut off.

Electro-hydraulic valve banks

Centralised valve banks for automated and remote-controlled support systems.

Support controllers

Control units and keypads for adjacent-support sequencing and automated control.

We supply hydraulics for powered roof supports and mining machinery — not valves for general industrial piping, domestic or automotive use. If your application is outside mining, tell us and we will say so honestly.

Send us your drawing or part number

Why mines and OEMs buy from us

Most of our export business comes from repeat orders — the first shipment is what convinces the maintenance department.

01

Factory-direct pricing

You buy from the manufacturer, not a trading company. No intermediary margin between the mine and the production line.

02

Production to drawing

Send a drawing, a sample or a competitor part number. We check the interface dimensions, confirm them with you and produce to match.

03

Every unit pressure-tested

Each valve is tested on the bench before packing. Test records can ship with the order.

04

Spare parts stay available

Seal kits and wear parts remain in supply after the original equipment stops being produced — that is what keeps a face running.

05

Export packing and documents

Seaworthy packing, full export documentation, and shipping arranged to Kazakhstan, Central Asia and beyond.

06

An engineer answers, not a chatbot

Technical questions go to the people who build the valves. Answers usually come back the same working day.

Find the right series

Match your support type and working pressure to a valve family. If your support is not listed, send the drawing — custom production is routine for us.

Tell us your support type and working pressure and we will match the valve series. Send the drawing or the original part number and we will confirm the interface dimensions.

From the workshop

Photographs taken in production. Valve blocks, valve banks and control units are machined and assembled in-house.

Captions describe what is visible in each photograph and will be replaced with official product names once confirmed.

Quality, approval and documentation

A valve that fails underground stops a production face. Our process — and the paperwork your procurement department needs — is built around that fact.

Pressure test bench

Functional and pressure testing of finished valves, with records available on request.

Material traceability

Batch traceability from incoming material to the valve serial number.

Documentation with every order

Datasheets, drawings, test reports and applicable certificates ship with the goods.

Questions mines ask us first

What is your minimum order quantity?

We quote from small trial orders upward. A first order is usually a mixed batch of the parts a maintenance team consumes fastest, so you can test quality before committing to volume.

Can you produce to our drawing or a competitor's part number?

Yes. Send the drawing, a photo of the part with dimensions, or the original part number. We confirm the interface dimensions before production and send a drawing for your approval.

How long does delivery take?

Standard items ship from stock or short production runs; custom parts take longer. Tell us the part list and required date and we will confirm a schedule with the quotation.

Which certificates and documents do you provide?

Datasheets, drawings, test reports and the certificates we hold — including mining product approval — are provided with the order. Tell us exactly what your procurement department requires and we will confirm before you order.

How do you ship to Kazakhstan and Central Asia?

By air, rail or sea depending on weight and urgency, with export documentation prepared for your customs broker. We will quote the terms that suit your logistics chain.

Request a quotation

Send the part number, drawing or working conditions. We will come back with a price and a delivery schedule.

  • Technical review by the production team, not a sales script
  • Your drawings stay confidential

We use your details only to answer this enquiry.

WhatsApp Email Get a quote